Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

1165 Allgood Road Northeast, Suite 20
Marietta, GA, 30062
United States


LP07 Series High Current Inductor

ICE Components LP07 Series High Current Inductor designed for VRM and high frequency high current switching power supplies.


(Flat Coil Power Inductor)


• Low cost design
• Saturation current rating up to 85A
• Low DCR
• Suitable for pick and place applications


• AC/DC and DC/DC Converters
• Servers/Workstations
• Telecom Switches
• Voltage Regulator Modules


• Reel Diameter: 13"" 
• Reel Width: 24mm
• Pieces Per Reel: 350

Part Number Inductance (Nom.) DCR (Max.) DCR (Typ.) IDC ISAT
LP07-142 1.40 µH 2.20 mΩ 1.90 mΩ 28 A 26 A
LP07-181 0.18 µH 0.45 mΩ 0.32 mΩ 85 A 45 A
LP07-202 2.00 µH 3.00 mΩ 2.60 mΩ 24 A 21 A
LP07-282 2.80 µH 4.30 mΩ 3.90 mΩ 20 A 17 A
LP07-392 3.90 µH 5.25 mΩ 4.50 mΩ 16 A 16 A
LP07-451 0.45 µH 0.90 mΩ 0.69 mΩ 53 A 40 A
LP07-801 0.80 µH 1.40 mΩ 1.20 mΩ 36 A 31 A


Idc: the DC current required to produce a temperature rise of 40°C at an ambient temperature of 25°C.
Isat: the DC current required to reduce to nominal inductance by 20% at an ambient temperature of 25°C.
Inductance (Nominal): Tested at 100kHz, 0.1Vrms.

• Electrical specifications at 25°C. 
• Operating range: -40°C to +130°C. This is a combination of ambient plus temperature rise. 
• Meets UL 94V-0. 
• Inductance tolerance is +/-20%.