Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

1165 Allgood Road Northeast, Suite 20
Marietta, GA, 30062
United States

(678)560-9172

LP02-3 Series High Current Inductors

ICE Components LP02-3 Series high current inductors for high current dc-dc converters

LP02-3 SERIES

(Low Inductance, One Turn)


FEATURES

• Design Verified by Leading IC Manufacturers
• High Saturation Current of 85A
• Designed for Frequencies Up To 1MHz
• Suitable for Pick And Place Applications
• Tighter DCR Tolerances Available. 
• Contact ICE for Additional Details.

APPLICATIONS

• Voltage Regulator Modules (Vrms) 
• High Frequency, High Current Switching Power Supplies
• Synchronous Buck DC/DC Converters

PACKAGING

• Reel Diameter: 13"" 
• Reel Width: 16mm
• Pieces Per Reel: 1000

Part Number DCR (+/-10%) IDC ISAT Inductance
LP02-121-3 0.35 mΩ 40 A 52 A 120 nH
LP02-151-3 0.35 mΩ 40 A 43 A 155 nH
LP02-181-3 0.35 mΩ 40 A 37 A 180 nH
LP02-201-3 0.35 mΩ 40 A 32 A 200 nH
LP02-251-3 0.35 mΩ 40 A 25 A 250 nH
LP02-281-3 0.35 mΩ 40 A 22 A 280 nH
LP02-351-3 0.35 mΩ 40 A 16 A 350 nH
LP02-900-3 0.35 mΩ 40 A 72 A 90 nH
LP02-121-3AMG 0.50 mΩ 29 A 55 A 120 nH
LP02-151-3AMG 0.50 mΩ 29 A 43 A 155 nH
LP02-181-3AMG 0.50 mΩ 29 A 35 A 180 nH
LP02-201-3AMG 0.50 mΩ 29 A 30 A 200 nH
LP02-251-3AMG 0.50 mΩ 29 A 25 A 250 nH
LP02-281-3AMG 0.50 mΩ 29 A 21 A 280 nH
LP02-351-3AMG 0.50 mΩ 29 A 15 A 350 nH
LP02-900-3AMG 0.50 mΩ 29 A 68 A 90 nH

TEST CONDITIONS:

Idc: DC current that causes a 40°C temperature rise. PCB layout, trace thickness and width, airflow and proximity to other devices will effect the temperature rise.
Isat: Inductance drops 15% at rated Isat
Inductance (nominal): Tested @ 1MHz, 0.1Vrms, +/- 15%.

• Electrical specifications at 25ºC. 
• Operating temperature range: -40ºC to +130ºC. 
• Meets UL 94V-0. 
• Test equipment used includes HP4194A Impedance Analyzer, GPR-1210 HHD DC Power Supply, and CH502A Ohmmeter.

Lower cost alternate material is available by ordering parts ending with AMG.