Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

1165 Allgood Road Northeast, Suite 20
Marietta, GA, 30062
United States

(678)560-9172

IPC Series High Current Inductors

ICE Components IPC Series low profile high current inductors design for low profile switching power supplies.


FEATURES

• Lowest molded height (1.2mm) in this package footprint
• Shielded construction
• Frequency range up to 3.0MHz
• Lowest DCR/µH in this package size
• Handles high transient current spikes without saturation
• Ultra low buzz noise due to composite construction
• Encapsulated body offers improved environmental protection and moisture resistance
• Higher dielectric withstanding voltage vs IHLP
• Flame retardant encapsulant (UL 94 V-0)
• Corrosion resistant package
• Compliant to RoHS directive 2011/65/EU

APPLICATIONS

• PDA/notebook/desktop/server applications
• High current Pol converters
• Low profile, high current power supplies
• Battery powered devices
• DC/DC converters in distributed power systems
• DC/DC converter for Field Programmable Gate Array (FPGA)

 

  -  Parts available @ Mouser

Part Number Footprint Height Inductance DCR (Max) ISAT IDC
IPC-2520AB-R33-M 2.0 X 2.5 mm 1.2 mm 0.33 μH 17 mΩ 4.3 A 5.6 A
IPC-2520AB-R47-M 2.0 X 2.5 mm 1.2 mm 0.47 μH 25 mΩ 3.8 A 4.5 A
IPC-2520AB-1R0-M 2.0 X 2.5 mm 1.2 mm 1.00 μH 53 mΩ 2.8 A 3.1 A
IPC-2520AB-2R2-M 2.0 X 2.5 mm 1.2 mm 2.20 μH 98 mΩ 1.8 A 2.3 A
IPC-2520AZ-R33-M 2.0 X 2.5 mm 1.0 mm 0.33 μH 23 mΩ 4.8 A 5.0 A
IPC-2520AZ-R47-M 2.0 X 2.5 mm 1.0 mm 0.47 μH 34 mΩ 4.2 A 4.4 A
IPC-2520AZ-1R0-M 2.0 X 2.5 mm 1.0 mm 1.00 μH 54 mΩ 2.8 A 3.1 A
IPC-2520AZ-2R2-M 2.0 X 2.5 mm 1.0 mm 2.20 μH 110 mΩ 2.1 A 2.3 A

TEST CONDITIONS

• All test data is referenced to 25 °C ambient
• Operating temperature range -55 °C to +125 °C
• Idc(A):DC current (A) that will cause an approximate ΔT of 40 °C
• Isat(A):DC current (A) that will cause Lo to drop approximately 30%
• The part temperature (ambient + temp rise) should not exceed 125 °C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.

* free samples for qualified customers